A JAMB score of 260 qualifies for Mechanical Engineering at 22 institutions in our 2026 dataset. The lowest cut-off for the course is 233.
Where 260 qualifies for Mechanical Engineering
| Institution | Course | UTME cut-off | Aggregate | Type | Status |
|---|---|---|---|---|---|
| UNILAG Lagos | Mechanical Engineering | 258 | 74.3 | federal | Qualifies |
| OAU Osun | Mechanical Engineering | 253 | 73.6 | federal | Qualifies |
| UI Oyo | Mechanical Engineering | 250 | 73.3 | federal | Qualifies |
| UNN Enugu | Mechanical Engineering | 247 | 72.9 | federal | Qualifies |
| FUTO Imo | Mechanical Engineering | 242 | 72.3 | federal | Qualifies |
| NDA Kaduna | Mechanical Engineering | 242 | 72.3 | federal | Qualifies |
| UNIZIK Anambra | Mechanical Engineering | 241 | 72.1 | federal | Qualifies |
| FUTA Ondo | Mechanical Engineering | 240 | 72.0 | federal | Qualifies |
| ABUAD Ekiti | Mechanical Engineering | 238 | 71.8 | private | Qualifies |
| ABU Kaduna | Mechanical Engineering | 238 | 71.8 | federal | Qualifies |
| UNIPORT Rivers | Mechanical Engineering | 238 | 71.8 | federal | Qualifies |
| UDUSOK Sokoto | Mechanical Engineering | 237 | 71.6 | federal | Qualifies |
| BUK Kano | Mechanical Engineering | 236 | 71.5 | federal | Qualifies |
| LMU Kwara | Mechanical Engineering | 236 | 71.5 | private | Qualifies |
| MAUTECH Adamawa | Mechanical Engineering | 236 | 71.5 | federal | Qualifies |
| UNIBEN Edo | Mechanical Engineering | 236 | 71.5 | federal | Qualifies |
| DELSU Delta | Mechanical Engineering | 235 | 71.4 | state | Qualifies |
| FUTMINNA Niger | Mechanical Engineering | 235 | 71.4 | federal | Qualifies |
| OOU Ogun | Mechanical Engineering | 235 | 71.4 | state | Qualifies |
| RSU Rivers | Mechanical Engineering | 235 | 71.4 | state | Qualifies |
| ATBU Bauchi | Mechanical Engineering | 234 | 71.3 | federal | Qualifies |
| FUNAAB Ogun | Mechanical Engineering | 233 | 71.1 | federal | Qualifies |
What this means in plain language
The course cut-off mark is the UTME threshold to be considered for admission to Mechanical Engineering at a given institution. Clearing it means your application proceeds to post-UTME screening. Mechanical Engineering cut-offs in our 2026 dataset range from 233 to 258 across Nigerian universities.
A score of 260 is above the lowest cut-off and qualifies you to apply at the institutions listed above.
If 260 is not enough, what now?
Three honest routes are open. First, retake JAMB next cycle aiming for a higher score. Second, change first-choice course to a related programme with a lower cut-off but similar career destination (use our quiz to find one). Third, explore the same course at less competitive institutions, including state and private universities where cut-offs sit lower.
Diploma routes (ND at a polytechnic, then HND or Direct Entry to a degree), pre-degree programmes and JUPEB are also workable longer paths. They take more time but they work.
Not sure what to do next?
Take our free 8-minute quiz. Tell us your score, subjects and preferences, and we'll show you five courses that realistically match - with the universities that will admit you.
Take the career quizFrequently asked questions
Can I study Mechanical Engineering with 260 in JAMB 2026?
Yes. A JAMB score of 260 qualifies for Mechanical Engineering at 22 institutions in our 2026 dataset, where the cut-off is 260 or lower. Clearing the cut-off makes you eligible for post-UTME screening; the post-UTME aggregate then decides admission.
What is the actual cut-off mark for Mechanical Engineering in 2026?
Mechanical Engineering cut-off marks for 2026 range from 233 at the most accessible institutions to 258 at the most competitive, across the 22 institutions offering the course in this guide. JAMB's national minimum is 150, but the course-specific institutional cut-off is the figure that decides consideration.
Which universities offer Mechanical Engineering with a cut-off around 260?
Institutions with Mechanical Engineering cut-offs closest to 260 include UNILAG (258), OAU (253), UI (250), UNN (247). Use the full table on this page to see every institution sorted by cut-off.
If I don't qualify for Mechanical Engineering with 260, what are my alternatives?
Three routes. First, apply for Mechanical Engineering at a less competitive institution where the cut-off is at or below 260. Second, pick a related course in the same field with a lower cut-off. Third, use the change-of-course window during the JAMB cycle, or a longer path through polytechnic ND and Direct Entry, JUPEB or a pre-degree programme.
Can I retake JAMB to score higher for Mechanical Engineering?
Yes. JAMB UTME can be retaken in the next admission cycle. If 260 falls short for Mechanical Engineering, a focused retake aiming for 253+ opens the broader range of institutions. Run the retake plan in parallel with a polytechnic or pre-degree application so the year is not lost if the retake also falls short.
Should I consider Mechanical Engineering at a state or private university?
Often yes. State universities and newer federal universities frequently set lower Mechanical Engineering cut-offs than the leading federal universities, and several private universities admit on the national minimum plus an internal screening. The trade-off is fees: federal sits at ₦40,000-₦200,000 per session, state ₦80,000-₦400,000, private ₦600,000 and above.